Konica Minolta bizhub C3350 - Manual (Page 85)

[Print Functions] 3-11
3.2 Preparation for printing (USB connection) 3
Configuring USB connection settings (Mac OS X 10.3)
1
Connect a USB cable to the USB port of this machine.
% For details on the cable connection port, refer to page 1-9.
2
Select [Macintosh HD] (hard disk of the system) - [Applications] - [Utilities], then double-click [Printer
Setup Utility] to open the dialog box.
3
In the [Printer List] window, click [Add].
4
Select [USB] as the connection method.
Connected printers are detected.
% If no printer is detected, check that this machine is turned on and the USB cable is connected, then
restart the computer.
5
From the list, select the desired printer that is connected via the USB port.
The printer driver for the selected printer is displayed in [Print Using:].
6
Click [Add].
The addition process of the printer is then completed. Then, proceed to the [Installable Options] window
to configure the optional environment for this machine. For details, refer to page 3-6.
3.2.3 Initializing the printer driver
Configuring the optional environment of this machine
When you use this machine for the first time, properly configure the printer driver so that it contains informa-
tion such as the options installed on this machine.
1
Open [System Preferences...] in the Apple menu, then click the [Print & Fax] icon.
% In Mac OS X 10.7/10.8, click the [Print & Scan] icon. In Mac OS X 10.9, click the [Printer & Scanner]
icon.
% In Mac OS X 10.3, select [Macintosh HD] (system hard disk) - [Applications] - [Utilities], then double-
click [Printer Setup Utility] to open it.
2
Display the [Printer Information] window.
% In Mac OS X 10.5/10.6/10.7/10.8/10.9, click [Options & Supplies...]. In Mac OS X 10.4, click the
[Printer Setup...] icon.
% For the [Printer Setup Utility] window, click [Show Info] of the [Printer] menu.
3
Display the [Installable Options] window.
% In Mac OS X 10.9, click [Options].
% In Mac OS X 10.5/10.6/10.7/10.8, click [Driver].
% In Mac OS X 10.3/10.4, select [Installable Options].
4
Change the settings according to the options installed on this machine.