Konica Minolta bizhub PRO 1200 - Manual (Page 63)

Windows Printing
6
bizhub PRO 1200/1200P/1051 6-3
Wide paper sizes must be configured at the copier. A wide paper size
should be bigger than the corresponding base size. It need not have the
same size as the corresponding wide document page size (base size + 7
points on each edge), but is recognized by its name. Printing on wide
paper is performed in full bleed mode, i.e. the base size is printed without
leaving a margin. By default, documents printed on wide paper will be
centered on the paper.
For a list of wide page and paper sizes, see section 11 “Paper Sizes”.
6.1.2
Custom page size
Custom page sizes can be determined in three ways:
By defining forms within the Printers and Faxes dialog
By defining custom page sizes in the paper panel of the printer driver Plug-in
By entering the PostScript custom size in the page setup dialog of your
application.
Forms
Windows XP allows to define multiple named forms which can be used like
standard paper sizes.
To define a form, open
1
[Start menu],
2
select [Settings]
3
then go to [Printers and Faxes]
Make sure no printer is selected.
4
select [File]
5
then [Server Properties]
This shows the Properties of Print Server dialog.
6
In the Forms panel, check [Create a new form].
7
Enter the name and the size of the form and click [Save Form].