3 connection of the image controller, 1 ethernet connection, 2 usb connection – Konica Minolta bizhub PRO 1200 User Manual
Page 16: Connection of the image controller -3, Ethernet connection -3, Usb connection -3
Overview
2
bizhub PRO 1200/1200P/1051
2-3
2.3
Connection of the Image controller
You can use the copier as a printer by connecting image controller to a
network (Using with Ethernet connection) or a computer (USB connection).
2.3.1
Ethernet Connection
You can also connect the copier to computers supporting Ethernet. Several
alternatives can be considered in the Ethernet connection. In any of them,
you must set up the printer driver in each computer after configuring the
network (such as TCP/IP settings) for the image controller or the computers.
The following print patterns are shown here as examples.
SMB printing, LPR/LPD printing, Direct printing, Raw (Port9100) printing,
web service printing.
Printing in which AppleTalk and Bonjour from Macintosh is used.
IPP (Internet Printing Protocol) printing
Printing in which Novell NetWare is used.
2.3.2
USB Connection
You can connect your computer to the image controller via the USB port
(USB 2.0).