Konica Minolta bizhub PRO 1200 - Manual (Page 32)

Installation
3
bizhub PRO 1200/1200P/1051 3-13
necessary to prepare the network at your client computer.
1
In the "Apple" menu, select [System Preferences].
2
Click [Network]
3
From [Show], select [Built-in Ethernet].
4
AppleTalk: Click the [AppleTalk] tab and activate the checkbox [Make
AppleTalk active].
LPR or IPP: Click the [TCP/IP] tab to set an IP address and subnet
mask, if necessary.
5
Click [Apply (now)].
6
Click the "Close" button on the upper left of the window.
If the message "This service has unsaved changes" (Mac OS X 10.5)
appears, click [Apply] to confirm the changes you made.
Adding a printer (Mac OS X 10.4/10.5)
1
In the "Apple" menu, select [System Preferences].
2
Click [Print & Fax]
3
Click [+] provided on the lower left of the window.
Bonjour/AppleTalk: In the list of detected printers in the [Default
Browser] tab select the desired printer.
LPR/IPP: Select a protocol in the [IP Printer] tab and enter the IP
address of the copier. (For IPP, additionally enter "ipp" as queue
name.)
4
Mac OS X 10.5: click [Print using] -> [Select a driver to use] -> select
[KONICA MINOLTA 1200/1051PS(Plug)] from the list, and click [Add].
You can enter search terms in the text box to narrow your results.
Mac OS X 10.4: click [Print using] -> select [KONICA MINOLTA] from
the manufacturers list, -> select [KONICA MINOLTA
1200/1051PS(Plug)], and click [Add].
The new printer is displayed in the printer list.