Konica Minolta bizhub 751 - Manual (Page 84)

751/601 2-68
Administrator Operations 2
4
Enter the new 20-digit Image Data Encryption Passphrase from the keyboard and keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Settings screen.
5
Touch [OK].
? What happens if the Image Data Encryption Passphrase entered does not meet the requirements of
the Password Rules?
% If the Image Data Encryption Passphrase entered does not comply with the Password Rules, a
message appears that tells that the Image Data Encryption Passphrase entered cannot be used.
Enter the correct Image Data Encryption Passphrase. For details of the Password Rules, see
"Password Rules" on page 1-9 .
6
To prevent entry of a wrong Image Data Encryption Passphrase, enter the 20-digit Image Data
Encryption Passphrase once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Settings screen.
7
Touch [OK].
? What if there is a mismatch in the Image Data Encryption Passphrase?
% If there is a mismatch in the Image Data Encryption Passphrase, a message appears that tells that
there is a mismatch in the Image Data Encryption Passphrase. Perform steps 4 through 7 once
again.