Konica Minolta bizhub 751 - Manual (Page 59)

751/601 2-43
Administrator Operations 2
8
Touch [OK].
? What happens if the User Box Password entered does not meet the requirements of the Password
Rules?
% If the User Box Password entered does not comply with the requirements of the Password Rules, a
message appears that tells that the User Box Password entered cannot be used. Enter the correct
User Box Password. For details of the Password Rules, see
"Password Rules" on page 1-9 .
9
To prevent entry of a wrong password, enter the 8-digit User Box Password again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 6.
10
Touch [OK].
? What happens if there is a mismatch in the User Box Passwords?
% If there is a mismatch in the User Box Passwords, a message appears that tells that there is a
mismatch in the User Box Passwords. Perform steps 6 through 10 once again.
11
Make the necessary settings.
? What if a User Box No. is duplicated?
% A User Box No. that has been registered cannot be registered anew.
? What if no Name has been entered?
% If no Name has been registered, [OK] cannot be touched. Be sure to register the Name.
12
Touch [OK].