Konica Minolta bizhub 751 User Manual
Page 41
751/601
2-25
Administrator Operations
2
4
Touch [System Auto Reset].
5
Press the [C] key and enter the period of time (1 min. to 9 min.) after which System Auto Reset is
activated from the keypad.
–
The time for System Auto Reset can be set to a value between 1 min. and 9 min., variable in 1-min.
increments. An input data error message appears when any value falling outside the range of 1 to 9
min. is set. Enter the correct System Auto Reset Time again.
–
If no operations are performed for 1 min. even with System Auto Reset set to [OFF], the function is
activated to cause the user to log off from the mode automatically.
–
Press the [C] key to clear all characters.
6
Touch [OK].
This manual is related to the following products: