4 application software, From the pc, Application software – Konica Minolta bizhub 751 User Manual
Page 169: 4application software
751/601
4-2
Application Software
4
4
Application Software
4.1
PageScope Data Administrator
PageScope Data Administrator is an application for management purpose that allows the authentication,
destination and network functions of the machine to be edited or registered from a PC connected over the
network.
It allows the authentication, destination and network setting list to be downloaded in your PC, the data in the
list to be edited on the PC, and then the data to be written in the machine.
A destination list of file formats including XML, CSV, TAB, LDIF, and Lotus Notes Structured Text can be
downloaded. A destination list can also be downloaded by searching through or browsing destinations using
the LDAP protocol for a directory server such as Active Directory.
Select [Authentication Settings/Address Settings] to edit or register the authentication or destination function
of the machine, and select [Administrator settings] to edit or register the network function of the machine.
2
Note
Make sure that none of the general users of the machine will know the Administrator Password.
If the Administrator Password is forgotten, it must be set again by the Service Engineer. Contact your
Service Representative.
Do not leave the site while you are gaining access to the machine through PageScope Data Adminis-
trator. If it is absolutely necessary to leave the site, be sure first to log off from the PageScope Data
Administrator.
4.1.1
Gaining access from PageScope Data Administrator
1
Start the PageScope Data Administrator.
2
Select this machine from Device List and click [Authentication Settings/Address Settings] or
[Administrator settings].
3
Check the settings on the "Import device information" screen and click [Import].