3 changing the authentication mode, From the pc – Konica Minolta bizhub 751 User Manual
Page 174
751/601
4-7
Application Software
4
4.1.3
Changing the authentication mode
2
Note
Changing the Account Track setting erases all user and account information data that has previously
been registered. This changes all Personal User Boxes owned by the users who are deleted and all
Group User Boxes owned by the accounts that are deleted to Public User Boxes. If the password set
for a particular box before this change does not meet the requirements of the Password Rules,
however, no access can be made to the Public User Box, to which that specific box was changed. In
this case, the Administrator must first newly set a password that meets the requirements of the
Password Rules. For details of the Password Rules, see
.
If you have already logged on to the Administrator Settings via the control panel or using PageScope
Web Connection, the machine displays a message that tells that the write operation has not been
successful because of a device lock error. Click [OK] and wait for some while before attempting to
execute [Export to the device] again.
If there is a job being executed or a reserved job (timer TX, fax redial waiting, etc.) in the machine, the
machine displays a message that tells that the write operation has not been successful because of a
device lock error. Click [OK] and wait for some while before attempting to execute [Export to the device]
again.
0
For the procedure to access the machine, see steps 1 through 5 of
"Gaining access from PageScope
Data Administrator" on page 4-2
.
1
Access the machine through [Authentication Settings/Address Settings] mode of PageScope Data
Administrator.
2
Click the [Authentication settings].
3
From [Edit] on the tool bar, select [Authentication] and click [Change authentication mode].
4
Click the [Next].