Konica Minolta bizhub 751 - Manual (Page 135)

751/601 3-9
User Operations 3
3.2 Change Password Function
When [ON (MFP)] is set for Authentication Method of User Authentication, the machine permits each of all
users who have been authenticated through User Authentication to change his or her User Password.
The User Password entered is displayed as "*" or " ●."
3.2.1 Performing Change Password
2
Note
Do not leave the machine while you are in the user operation mode. If it is absolutely necessary to leave
the machine, be sure first to log off from the user operation mode.
0 For the logon procedure, see "Performing user authentication" on page 3-2 .
1
Log on to the user operation mode through User Authentication from the control panel.
2
Press the [Utility/Counter] key.
3
Touch [User Settings].
4
Touch [Change Password].