3 setting the image data encryption passphrase, Setting can be made only from the control panel – Konica Minolta bizhub 751 User Manual
Page 78
751/601
2-62
Administrator Operations
2
2.11.3
Setting the Image Data Encryption Passphrase
2
Note
When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Here is the sequence, through which the main power switch and sub power switch are turned on and
off:
Turn off the sub power switch
→ Turn off the main power switch → Turn on the main power switch → Turn
on the sub power switch
Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
Image Data Encryption Passphrase can be set, deleted
or changed when the Enhanced Security Mode
is set to ON.
0
For the procedure to call the HDD Settings menu to the display, see steps 1 and 2 of
.
1
Call the HDD Settings to the screen from the control panel.
2
When Touch [HDD Encryption Setting], [Image Data Encryption Passphrase] appears.
3
Touch [Image Data Encryption Passphrase].