Konica Minolta bizhub 751 - Manual (Page 161)

751/601 3-35
User Operations 3
0 For the logon procedure, see "Performing user authentication" on page 3-2 .
1
Log on to the user operation mode through User Authentication from the PageScope Web Connection.
2
Click the [Box] tab and the [Open User Box] menu.
3
Enter the User Box Number and User Box Password of the target User Box and click [OK].
? What if there is a mismatch between the User Box Number and the User Box Password?
% If there is a mismatch between the User Box Number and the User Box Password, a message ap-
pears that tells that authentication has not been successful. Click [OK] and perform step 3 once
again.
% If the Enhanced Security Mode is set to [ON], entry of a wrong User Box Password is counted as
unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) set by the Administrator of the machine or more, a message appears that tells
that authentication has not been successful for any subsequent operation for authentication. The
machine is then set into an access lock state, rejecting any more logon attempts. To cancel the ac-
cess lock state, the Administrator of the machine must perform the Release Setting. Contact the
Administrator of the machine.