Konica Minolta bizhub 25 - Manual (Page 99)

2-46 Specifying the Network Settings
Item Description
IPv6 Setting You can set the following settings:
l
Obtain IPv6 address
l Link Local Address
l Global IP Address
l Subnet Prefix Length
l Default Gateway
For details on the IPv6 settings, refer to Chapter 3, “Setting the
Connection Environment” in the Message Board Guide.
Note
You can also specify TCP/IP settings using • Message Board. For details, refer to
Chapter 3, “Setting the Connection Environment” in the Message Board Guide.
Make sure to obtain permission from the network administrator before changing •
the IP address. Improperly changing the IP address may cause the network to stop
functioning normally.
„ Opening the TCP/IP Settings Screen
Press .
1
Press [Management].
2
If an administrator password is set, enter the password and press [Enter].
3
If an administrator password is not set, proceed to step 4.
Press [Network Settings].
4
Press [TCP/IP Settings].
5