Konica Minolta bizhub 25 - Manual (Page 41)

1-34 Specifying Default Settings
Function Description Settings
Energy Save
Mode You can specify the settings for the low power mode
or sleep mode including the time it takes to switch
to those modes, or the time it takes to start or reset
the energy save mode.
Note
Regardless of this setting, if you press Save> on ready screen, the low power mode will
start immediately.
l Low Power Mode
If the machine is not used for the time set here, it
will automatically enter the low power mode.
l Sleep Mode
If the machine is not used for the amount of
time set here when in the Low Power Mode, it
automatically switches to sleep mode.
l Energy Save Period
You can set the time it takes for the machine to
switch from the low power mode or sleep mode to
the normal state, or vice-versa.
Start Time:
When this is set to ON, you can set the time to start
the low power mode.
Reset Time:
When this is set to ON, you can set the time to
reset the low power mode.
Low Power Mode
1 - 60 Minutes: 1 Minute
Sleep Mode
1 - 120 Minutes: 1 Minute
Start Time
OFF
ON
Reset Time
OFF
ON
Note
Underlined values are the default settings specified at the time of shipment.