beautypg.com

Importing / exporting using usb memory, Importing / exporting using usb memory -78, Directly copying via the network – Konica Minolta bizhub 25 User Manual

Page 131

background image

2-78 Mirroring the Machine Settings

Directly Copying Via the Network

„

You can directly copy the data for the machine settings to another machine via the

network. A computer is not required.

Destination machine

Copy

Original machine

Machine

settings

data

Note

You can save the data for the machine settings exported via the Web to USB

memory, and then import it into another machine. You can also import the data for

the machine settings exported to USB memory to a machine via the Web.

Use Message Board when importing or exporting the data for the machine settings

via the Web. For details, refer to Chapter 3, “Displaying and Copying Machine

Settings” in the Message Board Guide.

Importing / Exporting Using USB Memory

When exporting the data for the machine settings to USB memory and importing it into

another machine, use the screen of the machine.

Note

Only USB memory formatted with FAT12, FAT16, or FAT32 can be used.

USB memory with a security function, memory card readers connected via USB,

USB memory via an extension cable and USB hub, and USB memory that does not

meet the USB standards, are all unsupported.

If the USB memory becomes full while the data is being saved, the data that is

being written is all deleted. Therefore, make sure that the USB memory has enough

free space in advance.

If you want to connect the USB memory via an extension cable, use a cable that is

shorter than 3 meters.