Konica Minolta bizhub 25 User Manual
Page 97
2-44 Specifying the Network Settings
Function
Description
Settings
Reference page
TCP/IP Settings You can set the settings for using
the machine on a network.
l
Host Name
l
Workgroup
l
DNS Server Addresses
l
DNS Suffix
l
Obtain IP address (DHCP)
l
IP Address
l
Subnet Mask
l
Default Gateway
l
WINS Server Address
l
IPv6 Setting
The MAC address is
entered
WORKGROUP
Not registered
Not registered
ON
OFF
192.168.1.10
255.255.255.0
Not registered
Not registered
Refer to Chapter
3, “Setting the
Connection
Environment” in
the Message Board
Guide.
Archive
Settings
When the machine transmits
and receives documents via
fax or e-mail, you can transmit
those documents to a specified
destination via fax, or store them in
a specified shared folder.
Not registered
e-mail Gateway You can transmit documents to an
e-mail gateway (fax server).
l
Setting
You can specify the default setting.
l
Prefix
Enter the prefix for the local part of
the e-mail address.
Up to 32 characters can be entered.
l
Suffix
Enter the suffix for the local part of
the e-mail address.
Up to 48 characters can be entered.
ON
OFF
Not registered
Not registered
Authentication
Method
Set the authentication method for
users that log in.
Stand-Alone
Single Sign On
Network
Automatic
LogoutTime
You can set the time it takes before
the machine automatically logs out
a logged in user if no operations
have been performed on the
machine.
1 - 10min
3min
Delete
Restriction
Settings
You can initialize the access
restrictions set in Message Board
from the machine.
Use this function when you cannot
access Message Board.