Konica Minolta bizhub C364 - Manual (Page 92)

bizhub C554/C454/C364/C284/C224 2-76
2.15 Setting time/date in machine 2
2.15.2 Setting daylight saving time
0 For the procedure to call the System Settings screen on the display, see steps 1 and 2 of page 2-28.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1
Call the System Settings screen on the display from the control panel.
2
Touch [Daylight Saving Time] ö [Enable Settings].
3
Select [Yes]. Then, press the [C] key and enter time to be advanced as the daylight saving time.
% The current time is set forward to reflect daylight saving time.
4
Touch [OK].
5
Touch [Start/End Settings].
6
Select [Weekly] or [Daily]. Then, specify the start date/time and the end date/time of a period of time to
which the daylight saving time is applicable.
7
Touch [OK].