Konica Minolta bizhub C364 - Manual (Page 138)

bizhub C554/C454/C364/C284/C224 3-15
3.3 Secure Print Function 3
8
Enter the Secure Print Password from the keyboard or keypad.
% Any Secure Print Password that does not meet the Password Rules is not accepted.
% For the Secure Print Password, enter the one that has been set on the printer driver side.
% Press the [C] key or touch [C] to clear the value entered last.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the previous screen.
9
Touch [OK].
% If a wrong Secure Print Password is entered, a message that tells that the authentication has failed
appears. Enter the correct Secure Print Password.
% If two or more Secure Print documents have been selected in step 7, the machine counts as unau-
thorized access any Secure Print document, the Secure Print Password of which is a mismatch.
% If the Enhanced Security Mode is set to [ON], entry of a wrong Secure Print Password is counted as
unauthorized access. If a wrong Secure Print Password is entered a predetermined number of times
(once to three times) or more set by the administrator of the machine, a message appears that tells
that authentication has not been successful for any subsequent operation for authentication. The
machine is then set into an access lock state, disabling access to the Secure Print document.
To cancel the access lock state, the administrator of the machine must perform the Release Setting.
Contact the administrator of the machine.
10
Touch [Print].