Konica Minolta bizhub C364 - Manual (Page 6)

bizhub C554/C454/C364/C284/C224 1-2
1.1 Introduction 1
1 Security
1.1 Introduction
Thank you for purchasing our product.
This User's Guide contains the operating procedures and precautions to be used when using the security
functions offered by the bizhub C554/C454/C364/C284/C224 machine. To ensure the best possible perfor-
mance and effective use of the machine, read this manual thoroughly before using the security functions. The
administrator of the machine should keep this manual for ready reference. The manual should be of great
help in finding solutions to operating problems and questions.
This User's Guide (Ver. 1.03) describes bizhub C554/bizhub C454/bizhub C364/bizhub C284/bizhub
C224/bizhub C7828/bizhub C7822/ineo
+
554/ineo
+
454/ineo
+
364/ineo
+
284/ineo
+
224/D410/D411/D412/
D415/D416/D417/D710/D711/D715/D716 Multi Function Peripheral Control Software (MFP Controller:
A2XK0Y0-0100-G00-56).
Compliance with the ISO15408 Standard
When the Enhanced Security Mode on this machine is set to [ON], more enhanced security functions are
available.
The security functions offered by the bizhub C554/C454/C364/C284/C224 machine comply with
ISO/IEC15408 (level: EAL3).
Operating Precautions
The machine gives an alarm message or an alarm sound (peep) when a wrong operation is performed or a
wrong entry is made during operation of the machine. (No "peep" alarm sound is issued if a specific sound
setting in Sound Setting of Accessibility Setting is set to [OFF].) If the alarm message or alarm sound is given,
perform the correct operation or make the correct entry according to the instructions given by the message
or other means.
The administrator of the machine should exit from the current mode to return to the basic screen whenever
the access to that mode is completed or if he or she leaves the machine with the mode screen left displayed.
The administrator of the machine should make sure that each individual general user exits from the current
mode to return to the basic screen whenever the access to that mode is completed or if the user leaves the
machine with the mode screen left displayed.
If an error message appears during operation of the machine, perform steps as instructed by the message.
For details of the error messages, refer to the User’s Guide furnished with the machine. If the error cannot be
remedied, contact your service representative.
The PageScope Web Connection functions can be used only if the setting is made to accept "Cookie."