beautypg.com

Konica Minolta bizhub C364 User Manual

Page 19

background image

bizhub C554/C454/C364/C284/C224

2-3

2.1

Accessing the Administrator Settings

2

3

Enter the Administrator Password from the keyboard or keypad.

% Press the [C] key to clear all characters.

% Touch [Delete] to delete the last character entered.

% Touch [Shift] to show the upper case/symbol screen.

% Touch [Cancel] to go back to the previous screen.

4

Touch [OK].

% If a wrong Administrator Password is entered, a message that tells that the Administrator Password

does not match appears. Enter the correct Administrator Password.

% If the Enhanced Security Mode is set to [ON], entry of a wrong password is counted as unauthorized

access. If a wrong Administrator Password is entered a predetermined number of times (once to
three times) or more set by the administrator of the machine, a message appears saying that the
machine accepts no more Administrator Passwords because of unauthorized access for any sub-
sequent entry of the Administrator Password. The machine is then set into an access lock state.
To cancel the access lock state, settings must be made by the Service Engineer; or, turn off, and
then turn on, the main power switch of the machine. If the main power switch is turned off and on,
the access lock state is canceled after the lapse of time set for [Release Time Settings]. When the
main power switch is turned off, then on again, wait at least 10 seconds to turn it on after turning it
off. If there is no wait period between turning the main power switch off, then on again, the machine
may not function properly.
Here is the sequence, through which the main power switch and sub power key are turned on and
off:
Turn off the sub power key ö Turn off the main power switch ö Turn on the main power switch ö
Turn on the sub power key

5

Press the [Reset] key to log off from the Administrator Settings.