Konica Minolta bizhub C364 - Manual (Page 108)

bizhub C554/C454/C364/C284/C224 2-92
2.18 SNMP Setting Function 2
0 For the procedure to access the Admin Mode, see page 2-2.
0 Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1
Start PageScope Web Connection and access the Admin Mode.
2
Click the [Network] tab.
3
Click [SNMP Setting] from the menu.
4
Enter the auth-password and priv-password in the boxes marked by the rectangle, that is, the Write
side SNMP v3 Setting.
% For the current password, enter the MAC Address that is set in the machine. To check the MAC Ad-
dress, see step 7 of page 2-87.
% The entry of a wrong SNMP password (auth-password, priv-password) is counted as unauthorized
access, if the Enhanced Security Mode is set to [ON]. If a wrong SNMP password (auth-password,
priv-password) is entered a predetermined number of times (once to three times) or more set by the
administrator of the machine, the machine is set into an access lock state, rejecting any more logon
attempts. To cancel the access lock state, perform the Release Setting by the administrator of the
machine.
5
Click [OK].
% If the entered auth-password or priv-password does not meet the Password Rules, a message that
tells that the entered auth-password or priv-password cannot be used appears. Enter the correct
auth-password or priv-password. For details of the Password Rules, see page 1-9.
% If the entered auth-password or priv-password does not match, a message that tells that the auth-
password or priv-password does not match appears.