Konica Minolta KIP 7100 - Manual (Page 45)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 44 -
Percentage Key Pad
To enter a percentage directly into the UI,
a. Press on the Percentage value
displayed (the number is a
button).
b. This will show a keypad to enter
the value. (Please note that the
button Manual on the side is a default.)
c. Press the desired zoom value and press enter.
Page Size Zoom
To enter a zoom percentage based on pages sizes into the UI:
a. Press on the Percentage value displayed (the number is a button).
This will show a keypad to enter the value.
b. Select Standard button.
c. Select the original page size by pressing onto the original page size
button.
d. Please note either Engineering or Architectural mode can be utilized
by pressing on the button below the original page size.
e. Select the desired Copy page size. Again please note either
Engineering or Architectural mode can be utilized.
f. Press Enter to confirm your selections or Cancel to restart.