Custom, Kip touchscreen software – Konica Minolta KIP 7100 User Manual
Page 105

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. 2012 KIP. vii_iv
- 104 -
Custom
This mode allows the original width and length to be determined by the
number pad.
Set the width of the scan. Note that these are only Standard Sizes.
Set a Standard Length or Custom Length – set the Custom length in the key pad and press enter.
Standard Length
Custom Length
The cut length will now be displayed in the Manual button. In this example 18” width and a custom
length of 25.8”.