Konica Minolta KIP 7100 - Manual (Page 119)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 118 -
This will allow the automatic width detection system to determine the image width when an original is
placed in the KIP 3000.
Engineering widths = 34, 22, 17, 11, and 8.5 inches
Architectural widths = 36, 30, 24, 18, 12, and 9 inches
Original Type
Select one of the three different predetermined original types. The
selections are:
Line- used for simple color line documents
Line / Photo- used for a combination of color lines & photos
Photo- used for color photographic originals
Press the desired original setting from one of the three diagrams. This will allow automatic image quality
adjustments for the next scan. Please note that the selection will be highlighted with a “black circle”
and the icon will become white, as in the above example “Line/Photo”.
Original Size
This region is used to select the image size of original being scanned.
Automatic Size
For most scans, “Automatic” should be selected. This will allow the KIP
3000 to automatically determine the width and length of the scan
without any user intervention.
(Please also note “Original Size Mode”)