Konica Minolta KIP 7100 - Manual (Page 126)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 125 -
Make any of the required adjustments / selections and press “OK” to accept. The selections will now be
displayed on the main Scan screen.
Mailbox
This region of the Scan screen allows the user to select where the color files will be placed. Please see
the section titled Mailbox command center starting on page 63 for more details.
Start
No function at this time in Scan Mode.
All scans in Scan Mode are “Auto Start”.
Reset / Stop
This button has two functions.
1.
Press the Stop button to stop the current scan. The original will be ejected
automatically. If not, open Top Cover to remove the original.
2. Press the Reset button to restore the “default settings” in Scan Mode. Some
of the default settings are determined in the Information / Help Screen of the
UI. (see Scan Mode Configurations chapter)
Re-Scan
If the scanned image was not satisfactory, you can replace the last image scan by
selecting this button and proceeding with the scan procedure as normal.
View Last
Allows the last scan to be reviewed again on the UI.