Konica Minolta KIP 7100 - Manual (Page 43)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 42 -
If a roll is already selected in Media, then the following screen appears now only requesting the length.
b. Once the roll is determined (if so required) the length can now be set.
• Standard Length
• Auto Length
• Custom Length
c. Standard Length – use an industry standard length. Select
the length and press Enter.
d. Auto Length – uses the length of the original to determine
the copy length. Select and press Enter.