Konica Minolta KIP 7100 - Manual (Page 167)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 166 -
No. Name Function
1 Mode Selects the “Mode” of the system. (Current Jobs/Job History )
2 User Name – Job # Display the User and any user info for the job ID. A job can be selected
for other functions noted below.
3 Media Information Displays and allows change of the Width and Type. Shows the amount
remaining per roll deck.
(two or four rolls depended on system)
4 Status Shows the current status of a job and media selection.
5 Type Displays a copy or network print job
6 Total Displays the total number of prints and current number printed.
7 To Top After a job is selected (see #2) the position in the queue can be
changed to the next job printed.
8 Delete After a job is selected (see #2) it can be removed from printing.
9 Pause Pauses printer to allow media change, etc.
10 Up/Down Scrolls through pages in the queue if so available.