Konica Minolta KIP 7100 - Manual (Page 143)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 142 -
Auto Start
Auto Start on or off can be set here. Selecting the Check box will set it in the On position, when a piece
of papers is detected the scanner will automatically feed the paper through making a copy.
Auto Start off Auto Start on
Automatic Deskew
Turning on Automatic Deskew will allow for up to a 5 degree skew of the file to be automatically
corrected on the filnal output.
Deskew off Deskew On
Label
If used the Label feature will allow for the addition of a custom label on the lead edge of
the final output.
Selecting the white box will open the following window
and allow for the entering of the label to be applied.