Konica Minolta KIP 7100 - Manual (Page 130)

KIP Touchscreen Software
Note: *Feature Not Applicable to KIP Network Printers Only.
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP.  2012 KIP. vii_iv
- 129 -
Step 5 – Enter the IP addre3ss or Host name of the
pritner to connect to.
Step 6 – select the desired options from the
placement screen.
Step 7 – the Technical label is generally used for
testing. Any information selected will be printed in a
header on the lead edge of the output.