Konica Minolta bizhub PRESS C70hc - Manual (Page 71)

IC-601 6-4
6.1 Mac OS X 10.4/10.5/10.6 6
% When OS X 10.5 is used, select the [Select a driver to use...] from the [Print Using:], and then select
the printer driver of the desired model name from the list.
% When OS X 10.4 is used, select [KONICA MINOLTA] from the [Print Using:], and then select the
printer driver of the desired model name from the list.
7
Click [Add].
When the selected printer is registered in the [Print & Fax], the setting procedure is completed.
Reference
- For OS X 10.4, you can also add a printer by clicking [Add] in the [Printer Setup Utility] window.
Configuring the AppleTalk settings
Configuring the [AppleTalk Settings] for the machine
Enable AppleTalk in [AppleTalk Settings], and then enter the printer name.
Important
- Mac OS X 10.6 does not support AppleTalk.
d
Reference
For details on the [AppleTalk Settings] of this machine, refer to "User's Guide POD Administrator's Refer-
ence" or "User's Guide Main Body".
Configuring [AppleTalk Setting] for the computer
Configure the AppleTalk settings for the Macintosh computer connected to the printer.
1
In the [Apple Menu], select [System Preferences...].
2
Click the [Network] icon.
3
The Ethernet setting window appears.
% For OS X 10.5, select [Ethernet], and then click [Advanced...].
% For OS X 10.4, select [Built-in Ethernet], and then click [Configure...].
4
Double-click the [AppleTalk] tab to enable AppleTalk.
5
Click the close button at the top left corner of the window.
% When the [This service has unsaved changes] message appears, click [Apply].