Perfect binding – Konica Minolta bizhub PRESS C70hc User Manual
Page 112
IC-601
10-11
10.3
Parameter details
10
Perfect Binding
[Front Cover Tray]
Off, Tray 1 - 5, Bypass
Tray
For C8000, Off, Tray 1 - 9
Specify a tray for a front cover.
[Print]
Select this check box to print on a front cover.
[Glossy]
Select this check box to print a front cover in glossy
mode.
C8000 does not support [Glossy].
[Paper Profile]
(Front cover)
[No Setting], [Registered
paper profile]
Selects predefined paper profile.
You can add a new paper profile to the list from the
control panel on this machine.
[Back Cover Tray]
Off, Tray 1 - 5, Bypass
Tray
For C8000, Off, Tray 1 - 9
Specify a tray for a back cover.
[Print]
Select this check box to print on a back cover.
[Glossy]
Select this check box to print a back cover in glossy
mode.
C8000 does not support [Glossy].
[Paper Profile]
(Back cover)
[No Setting], [Registered
paper profile]
Selects predefined paper profile.
You can add a new paper profile to the list from the
control panel on this machine.
[PI Back Cover
Tray]
Off, PI Tray 1-2
Select when printing a different type of paper, such as
thick paper, for the Back Cover.
Continuous insertion is available for up to 500 sheets
when PI Tray is selected.
Function Name
Option
Description
Function Name
Option
Description
[Cover Print
Mode]
[Off], [Cover Blank],
[Cover Print 1in1], [Cover
Print 2in1], [Cover Print
3in1]
Set this when using a perfect binder function.
[Glossy]
Off, On
Set this when printing a cover in glossy mode for a per-
fect binder.
C8000 does not support [Glossy].
[Cover Trim]
Off, On
Set this when trimming a cover for a perfect binder.
[Spine Width]
1.0 - 30.0 mm
Set the width of a spine.
The initial setting is 10.0mm at default.
[Cover 2-Sided]
Off, On
Set this when setting a duplex cover for a perfect bind-
er.
[Cover Tray]
Off, Tray 1-5, PI Tray 1-2,
PB Cover Tray, Bypass
Tray
For C8000, Off, Tray 1-9,
PI Tray 1-2, PB Cover
Tray
You can set a cover tray for a perfect binder.
[Cover Size]
-
Set the cover size.
Click [Custom Size] to set a custom size for the cover.
[Paper Profile]
-
Set a paper profile.