Konica Minolta bizhub PRESS C70hc - Manual (Page 226)

IC-601 17-4
17.2 Cannot configure the settings/Cannot print according to the settings 17
17.2 Cannot configure the settings/Cannot print according to the set-
tings
Check the following items when you cannot configure settings of the printer driver or cannot print according
to the settings you have configured.
Reference
- Some items for the printer driver may not be configured simultaneously.
17.2.1 The printer driver settings have no effect
Problem Possible Cause Remedy
Cannot select items in the print-
er driver. Some functions cannot be com-
bined. Grayed out items cannot be con-
figured.
A "conflict" message saying
"unable to configure" or "func-
tion will be canceled" appears. You are trying to configure the
functions that cannot be com-
bined. Check carefully the functions you
have specified, and then specify
the functions that can be com-
bined.
Cannot print according to the
settings you have configured. The settings may not be config-
ured correctly. Check the setting of each item of
the printer driver.
The selected functions can be
combined in the printer driver,
but may not be combined in this
machine.
The paper size or paper orienta-
tion specified in the application
may take precedence over the
settings in the printer driver
when printing. Configure settings in the applica-
tion correctly.
The staple function cannot be
specified. The staple function requires the
optional Finisher FS-521, FS-
531 or FS-612. Install the required options and
enable them on the printer driver.
Cannot staple. When printing a large number of
pages, stapling cannot be per-
formed. Change the number of pages to
be printed.
If the document contains pages
of different sizes, stapling can-
not be performed. Check the document.
The stapling position is not as
expected. The orientation setting is not
correct. Check the stapling position in the
printer driver settings.
Cannot specify the punch func-
tion. It requires FD-503, a punch kit,
or multi hole punch. Install the required options and
enable them on the printer driver.
The hole punching cannot be
specified when Booklet is se-
lected as the paper type. Check the setting of each item of
the printer driver.
Cannot punch. Printed pages may be fed out
without being punched if the pa-
per is loaded into the paper
source with an incorrect orienta-
tion. Check the orientation setting.
The punch position is not as ex-
pected. The orientation setting is not
correct. Check the punching position in
the printer driver settings.
Combination fails; pages are not
combined, but are printed sepa-
rately. Originals having different orien-
tations are combined. Align the orientations of the origi-
nal.
The overlay is not printed prop-
erly. Memory of the computer may
be insufficient. Simplify the overlay to reduce the
data size.
Images are not printed properly. Memory of the computer may
be insufficient. Simplify the images to reduce the
data size.