Konica Minolta bizhub PRESS C70hc - Manual (Page 134)

IC-601 11-7
11.3 Parameter details 11
[ICM Method] [ICM Disabled], [ICM Handled by
Host System], [ICM Handle by Print-
er], [ICM Handle by Printer using
printer calibration] Select an ICM method.
[ICM Intent] [Graphics], [Pictures], [Proof],
[Match] Specify an intent of ICM.
[Scaling] 1 to 1000% Select an enlarge or reduce ratio.
[TrueType Font] [Substitute with Device Font], [Down-
load as Softfont] Specify an output method of a TrueType
font.
[Advanced Print-
ing Features] [Enabled], [Disabled] Set this to enable the [Pages per Sheet
Layout] function.
[Pages per Sheet
Layout] [Right then Down], [Down then
Right], [Left then Down], [Down then
Left] Set this to enable the [Pages per Sheet
Layout] function.
[PostScript Out-
put Option] [Optimize for Speed], [Optimize for
Portability], [Encapsulated Post-
Script (EPS)], [Archive Format] Configure an output option for Post-
Script. For details, refer to the PostScript
guide.
[TrueType Font
Download Op-
tion] [Automatic], [Outline], [Bitmap], [Na-
tive TrueType] Set an download option for a TrueType
font.
[PostScript Lan-
guage Level] 1 - 3 Set a PostScript language level.
[Send PostScript
Error Handler] [Yes], [No] Set whether to send a PostScript error
handler or not.
[Mirrored Output] [Yes], [No] Set [Mirrored Output].
[Color Configura-
tion] [No Setting], [Image Controller De-
fault] Set whether to use the color configuration
in the image controller or not.
[Screening
(Text/Graphics)] Dot 1 - 2, Line 1 - 2, Stochastic Set screening for a text and graphic.
[Screening (Im-
age)] Dot 1 - 2, Line 1 - 2, Stochastic Set screening setting for an image.
[Feed Direction] [Auto], [Long Edge], [Short Edge] Set a direction to feed paper.
[Offset] Off, On Stagger after each set of copies speci-
fied.
[Print Position
Setting] [Off], [Left], [Center], [Right] Specify the print position.
[Weight] No Setting,
64-74g/m
2 ,
75-80g/m 2 ,
81-105g/m 2 ,
106-135g/m 2 ,
136-162g/m 2 ,
163-209g/m
2
,
210-256g/m
2
,
257-300g/m
2
For C8000:
64-74g/m
2
,
75-80g/m
2
,
81-105g/m
2
,
106-135g/m
2
,
136-162g/m
2
,
163-220g/m
2
,
221-256g/m
2
,
257-300g/m
2
,
301-350g/m
2
(In case the unit for paper weight is
g/m
2
)
Set weight of output paper.
[Colored Paper] [White], [Non-White] Specify color of output paper.
Function Name Option Description