Konica Minolta bizhub PRESS C70hc - Manual (Page 108)

IC-601 10-7
10.3 Parameter details 10
Reference
- The maximum possible setting in [Custom Size] is "330 x 1200 mm". However, at the factory default
setting, the maximum sheet size is "330 x 487 mm". If you wish to specify a long size for banner printing,
contact your service representative.
C8000 cannot print banner printing size.
10.3.3 [Finishing] tab
[Paper Size] The paper sizes regis-
tered as the standard pa-
per sizes and custom
sizes Set a paper size.
[Fit to Paper Size] Off, On Set this to print an original fitting to paper if their sizes
are different.
[Zoom] 1 to 1000% Select an enlarge or reduce ratio.
[Full Bleed] Off, On Prints in the original image without blank borders.
[180º Rotate] Off, On Select this check box to rotate the document 180 to
print.
Function Name Option Description
Function Name Option Description
[Paper Tray] Automatically Select,
Tray 1 - 5, Bypass Tray Select a paper tray to be used.
Selectable items vary depending on the option installa-
tion status.
[Paper Profile] No Setting, Registered
paper profile Selects predefined paper profile.
You can add a new paper profile to the list from the
control panel on this machine.
[Output Tray] [Default], [Main Tray],
[Sub Tray] Specify the tray to output the printed pages.
Selectable items vary depending on the option installa-
tion status.
[Binding Position] [Left Bind], [Right Bind],
[Top Bind] Specify the binding position.
[Feed Direction] [Auto], [Long Edge],
[Short Edge] Set a direction to feed paper.