Konica Minolta bizhub PRESS C70hc - Manual (Page 70)

IC-601 6-3
6.1 Mac OS X 10.4/10.5/10.6 6
6.1.2 Selecting and connecting a printer (OS X 10.4/10.5/10.6)
In OS X 10.4/10.5/10.6, the printer can be connected with Bonjour, LPR (LPD), or IPP.
In OS X 10.4/10.5, the printer can also be connected using AppleTalk.
After configuring the network setting for the machine, selecting this machine as the printer to be used in the
[Print & Fax] window enables printing.
Configuring the Bonjour settings
Configuring the [Bonjour Setting] for the machine
Enable Bonjour in [Bonjour Setting] for the machine, and then enter the Bonjour name.
d
Reference
For details on the [Bonjour Setting] of this machine, refer to "User's Guide POD Administrator's Reference"
or "User's Guide Main Body".
Adding a printer
1
In the [Apple Menu], select [System Preferences...].
2
Click the [Print & Fax] icon.
3
Click [+] on the [Print & Fax] window.
4
Click [Default].
Connected printers are detected.
% If no printer is detected, turn this machine off, then on again.
In this case, turn off this machine, and then wait approximately 10 seconds before turning it on
again. If you turn the printer on immediately after turning it off, it may not function correctly.
5
From the [Printer Name] list, select the desired Bonjour-connected model name.
The printer driver corresponding to the selected printer name is automatically selected.
% You can check the printer name by selecting [Administrator Setting] - [Controller] - [Controller NIC
Setting Menu] - [Bonjour Setting]. In the default setting, the contents enclosed in parentheses ( ) suf-
fixed in [Bonjour Name] correspond to the low-order three bytes of the MAC address. The following
window shows an example where the printer name is changed to "Printer Name(Bonjour)".
% After the printer driver is selected, go to Step 7.
% If an incorrect printer driver is selected, go to Step 6.
6
Select the desired printer driver manually.
% When OS X 10.6 is used, select [Select Printer Software...] from [Print Using:], and then select the
printer driver of the desired model name from the list that is displayed in another window.