Konica Minolta bizhub PRESS C70hc - Manual (Page 195)

IC-601 14-17
14.2 Basic operations of User Settings 14
14.2.2 Printer Setting
You can set the outline processing in [Printer Setting] in [User Setting].
1
In the User Settings screen, press [Printer Settings].
% For details on displaying the User Settings screen, refer to page 14-16.
2
Press [Gray Text Outline].
The Gray Text Outline screen is displayed.
You can set the outline processing at printing.
- [Skeletonization]: Specify a strength of a thin line at a resolution of 600dpi.
(Default: Normal. In case of C8000: Strong)
- [Outline Emphasis]: Specify a strength of an outline at a resolution of 600dpi. (Default: Normal)
- [Process Black Sensitivity]: Specify a sensitivity of process black at a resolution of 600dpi.
(Default: Normal)
- [Thin Line Prevention]: Specify the faint prevention function against the skeletonization at a resolution
of 600dpi.
(Default: ON)
- [Skeletonization]: Specify a strength of a thin line at a resolution of 1200dpi.
(Default: Normal. In case of C8000: Strong)
- [Outline Emphasis]: Specify a strength of an outline at a resolution of 1200dpi.
(Default: Normal)