2 for network connection (smb), Settings of this machine, For network connection (smb) -26 – Konica Minolta bizhub PRESS C70hc User Manual
Page 64
IC-601
5-26
5.3
Windows 2000
5
5.3.2
For network connection (SMB)
To use SMB printing, specify the port by specifying the printer while installing the printer driver.
Settings of this machine
To use SMB printing, you must configure the network settings for the machine in advance.
d
Reference
For details on the network settings of this machine, refer to "User's Guide POD Administrator's Reference"
or "User's Guide Main Body".
Installing the printer driver using the Add Printer Wizard
0
Installing the driver to Windows 2000-based computers requires the administrator authority.
1
Insert the Driver CD-ROM into the CD-ROM drive.
2
Click [Start], and then select [Settings] - [Printers].
3
Double-click [Add Printer].
[Add Printer Wizard] appears.
4
Follow the instructions on the pages that follow.
5
On the window for specifying how the printer is attached, select [Local printer], and then click [Next >].
% Clear the [Automatically detect and install my Plug and Play printer] check box.
The page for [Select the Printer Port] appears.
6
Click [Create a new port:], and then select [Local Port] as the port type.
7
Click [Next >].
8
Enter "\\NetBIOS name\print service name" in the [Port Name] box.
% Enter the same NetBIOS name and print service name specified in [Print Settings] in [SMB Settings].
9
Click [OK].
[Add Printer Wizard] appears.
10
Click [Have Disk...].
11
Click [Browse...].
12
Select a desired printer driver folder in the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used. Available
printer drivers:
PS Plug-in driver, PPD driver
13
Click [OK].
The [Printer:] list appears.
14
Click [Next >].
15
Follow the instructions on the pages that follow.
Items to be configured
Description
IP Address
In [TCP/IP Settings] of this machine, specify the IP address.
SMB Setting
To use SMB printing:
At [Print Settings] in [SMB Settings] for the machine, specify NetBI-
OS Name, Print Service Name, and Workgroup.