Lenovo System Update Solution - Manual (Page 24)

Table 7. \UCSettings\General
Configurable item Description Value Action
Default value: NO Disable Disables the System
Update user interface.
Use this setting when
you want to configure
System Update using the
command prompt.
Possible values:
• YES
• NO
• If YES, the System
Update user interface
will not be displayed.
• If NO, the System
Update user interface
will be displayed.
Example:
\GENERAL
\Disable = NO
\UCSettings\HTTPSHelloSettings
The following table and example provides the settings and values for the HTTPSHelloSettings key.
Table 8. \UCSettings\HTTPSHelloSettings
Configurable item Description Value Action
Default value: 0 RetryLimit Specifies the maximum
number of times that
System Update will try to
connect to the Lenovo
Help Center Web site.
Possible values: Any valid
integer
System Update will stop
trying to connect to the
Lenovo Help Center Web
site after the connection
attempts reach the
maximum number of
tries.
Default value: 0 RetryWaitTime Specifies the maximum
amount of time (in
seconds) that System
Update will wait before
it tries to connect to the
Lenovo Help Center Web
site for another time after
the previous attempt fails.
Possible values: Any valid
integer
System Update will wait
the number of seconds
when attempting to
connect to the Lenovo
Help Center Web site after
the previous attempt fails.
The default value is
pre-configured. By default,
System Update will connect to
the Lenovo Help Center Web
site to search for updates for
itself. ServerName Specifies the server name
that System Update will
search for updates for
itself. Changing the
default value will disable
the Update Thyself
function of System
Update.
Possible values: Server name
or empty
System Update searches
the Lenovo Help Center
Web site for updates
for itself, even if it is
connected to a local
system or network share
repository. You can
disable the Web upgrade
for System Update by
clearing this value.
Example:
\HTTPSHelloSettings
\RetryLimit = 2
\RetryWaitTime = 2
\ServerName = https://
Note: When System Update connects to the Lenovo Help Center Web site, it communicates with different
servers. The RetryLimit and RetryWaitTime settings under the HTTPSHelloSettings key control the
18 System Update Solution Deployment Guide