Norgren 500 Series Nugget - Manual (Page 21)

Littleton, CO USA Phone: 303-794-2611 www.norgren.com VAL-11-21
Nugget 500 Series Valves
Factory Installed Back Cover Plates for Valve Bodies
The Back Cover Plate ordered with the valve allows the valve to be used in wash-
down environments such as food or medical processing. If a subbase valve is
desired for wash-down environments, use only the single subbase.
● For cover plate installed on an Inline Valve body specify with 54690-11 after the
valve body number.
● For cover plate installed on a Subbase Valve body specify with 54690-12 after
the valve body number.
Pneu-Fit Push-in Tube Fittings
Push-in tube fittings are an excellent way to save valve connection time and
simplify component replacement. See Norgren Fittings catalog APC-101 for a
complete selection of push-in tube fittings, flexible tubing, tubing markers, and tube
mounts.
Part Numbers for Replacement Solenoid Coils & Armature
Bases
Solenoid Coils:
24V/60Hz-24V/50Hz, 3.5W ...........54469-04
120V/60Hz-110V/50Hz, 3.5W .......54469-03
6VDC, 2W .....................................54469-05
12VDC, 2W ...................................54469-01
24VDC, 2W ...................................54469-02
110VDC, 3.4W ..............................54469-06
240V/60Hz-220V/50Hz, 7.5W .......54452-07
120V/60Hz-110V/50Hz, 7.5W .......54452-01
24V/60Hz-24V/50Hz, 7.5W ...........54452-05
12VDC, 7.5W ...............................54452-02
24VDC, 6W ..................................54452-03
Solenoid Base and Armature:
Without Override
6 to 7.5 Watt ................................54462-01
2 to 3.5 Watt ................................54462-03
With Locking Override
6 to 7.5 Watt ................................54462-02
2 to 3.5 Watt ................................54462-04
With Non-Locking Override
6 to 7.5 Watt ................................54462-09
2 to 3.5 Watt ................................54462-10
Part Numbers for Replacement Connectors
Cable Grip Connector.......................54934-01
Cable Grip Connector with
Indicator Light
110/120 VAC/DC ..........................54934-02
24 VAC/DC ...................................54934-08
1/2" NPT Conduit .............................54934-05
Molded 5-ft Cable Connector
0-220 VAC/DC ..............................54934-21
Molded 5-ft Cable Connector with
Indicator Light and surge
suppression
24 VAC/DC ...................................54934-30
110 VAC/DC .................................54934-35
240 VAC/DC .................................54934-37
Part Numbers for Repair Parts & Kits
Metal Coil Retaining Ring..................54453-01
Solenoid Connector Seal Kit .............54935-01
Solenoid Exhaust Port Diffuser .........54463-01
Solenoid Exhaust Port Filter
Ordered With Valve .......................54463-50
Ordered Separately .......................54463-51
Spool Replacement Kits: ...................
Single Pressure, 2-Position ...........54677-50
Dual Pressure, 2-Position..............54677-51
Single Pressure, 3-Position,
All Ports Blocked*.........................54677-52
Dual Pressure, 3-Position,
All Ports Blocked*.........................54677-53
Single Pressure, 3-Position,Cylinder
Open to Exhaust* ..........................54677-54
Dual Pressure, 3-Position, Cylinder
Open to Exhaust* ..........................54677-55
*In the center position
Seal Kits
Inline Valves ..................................54692-50
Subbase Valves .............................54692-51
Inline Valve to Fixed
Length Manifold.............................54674-89
Subbase Valve
to Subbase ....................................54672-89
Manifolding Subbase to
End Plates .....................................54673-89
Manifold clamping
pin (1) & set screws (2) .................54574-50
Mounting Screws Valve to Fixed
Length Manifold or Subbase .........54580-60
Mounting Screws Valve and
Speed Control to Subbase ............54580-61