Cirrus Logic CS8406 - Manual (Page 28)

28 DS580F6
CS8406
The channel status block pin (TCBL) may be an input or an output, determined by the state of the TCBLD
pin.
10.2 Serial Audio Port
The serial audio input port data format is selected as shown in Table 3 , and may be set to master or slave
by the state of the APMS input pin. The OMCK clock ratio is selected as shown in Table 4 . Table 5 describes
the equivalent Software Mode, bit se ttings for each of the available formats. Timing diagrams are shown in
Figure 7 .
COPY/C ORIG Function
0 0 PRO=0, COPY=0, L=0 copyright
0 1 PRO=0, COPY=0, L=1 copyright, pre-recorded
1 0 PRO=0, COPY=1, L=0 non-copyright
1 1 PRO=1
Table 2. Hardware Mode COPY/C and ORIG Pin Functions
SFMT1 SFMT0 Function
0 0 Serial Input Format IF1 - Left Justified
0 1 Serial Input Format IF2 - I²S
1 0 Serial Input Format IF3 - Right-Justified, 24-bit data
1 1 Serial Input Format IF4 - Right-Justified, 16-bit data
Table 3. Hardware Mode Serial Audio Port Format Selection
HWCK1 HWCK0 Function
0 0 OMCK Frequency is 256*Fs
0 1 OMCK Frequency is 128*Fs
1 0 OMCK Frequency is 512*Fs
1 1 OMCK Frequency is 256*Fs
Table 4. Hardware Mode OMCK Clock Ratio Selection
SISF SIRES1/0 SIJUST SIDEL SISPOL SILRPOL
IF1 - Left Justified 0 00 0 0 0 0
IF2 - I²S 0 00 0 1 0 1
IF3 - Right-Justified, 24-bit data 0 00 1 0 0 0
IF4 - Right-Justified, 16-bit data 0 10 1 0 0 0
Table 5. Equivalent Register Settings of Serial Audio Input Formats in Hardware Mode