Winland Electronics EA400 - Manual (Page 49)

D-011-0093 47
Specifications
Specifications
Item EA200 EA400
Dimensions Approximately 122 mm x 152 mm x 30.5 mm
(4.8” H x 6.0” W x 1.2” D)
Weight 0.25 kg (0.55 lb.) 0.27 kg (0.6 lb.)
Mounting Mountable directly to 2-gang standard electrical enclosure using
pre-drilled holes on EA200 / EA400 rear case. Can be mounted
to drywall or similar surfaces using anchor screws (not included).
Case Material ABS, UL94V-0 rated
Input (Operating) Voltage Power source must furnish REGULATED 11 to 14VDC
(EA200-12 and EA400-12) or 23 to 26VDC (EA200-24 and
EA400-24). Power can be supplied using a REGULATED
AC/DC adapter (not supplied; see “Accessories” on page 44), or
connect directly to a REGULATED DC power supply from an
alarm panel.
Note: Power supply requirement does not include additional
requirements for loads switched through alarm output relays
where power is derived from EA200 or EA400 terminal strip con-
nections.
Winland_English.fm Page 47 Wednesday, July 5, 2006 1:33 PM