Winland Electronics EA400 - Manual (Page 37)

D-011-0093 35
Note: Sensor types (“Red”, “Blue” or plain °F or °C) refer to the Zone programming
required for the type of sensor used:
•
settings are used for current-version thermistor temperature sensor s
TEMP-H-S and TEMP-H-W.
• settings are used for current-version thermistor temperature sensor s
TEMP-L-S and TEMP-L-W.
• Plain or settings are used for installations where earlier-version tem-
perature sensors ( Model numbers TA-S-D, TA-S-H, TA-S-L) are
already in place. For new installations, it is recommended that the RED
and BLUE thermistor temperature sensors listed above be used.
Refer to “Accessories” on page 44 for detailed information, if required.
Winland_English.fm Page 35 Wednesday, July 5, 2006 1:33 PM