Winland Electronics EA400 - Manual (Page 36)

34 D-011-0093
Programming the Zones
Program each Zone as follows:
1. Press the ZONE key. The Zone display appears.
2. Enter the Zone desired to be programmed (flashing) by using the INCREASE or
DECREASE keys to scroll to the desired Zone, and then press the ENTER key.
3. Enter the remaining data (from the choices in the sequence shown below) for the
Zone being programmed by similarly using the INCREASE or DECREASE keys to
scroll to the desired setting, and then pressing the ENTER key.
Winland_English.fm Page 34 Wednesday, July 5, 2006 1:33 PM