Winland Electronics EA400 - Manual (Page 46)

44 D-011-0093
Accessories
Note: In the table below, “Sensor Type Setting” specifies the appropriate sensor type
selection to be entered during Zone programming for the sensor type listed.
Where an accessory does not pertain to sensor type, this is denoted by “N/A”
(not applicable).
Accessories
Item
( Model Number) Description Sensor Type Setting
Temperature Sensors
Note: Although compatible with the EA200 / EA400, earlier-version temperature sensors ( Model Numbers
TA-S-D, TA-S-H, TA-S-L) are not recommended for new installations.
Note: ° C or ° F measurement is a function of EA200 / EA400 programming. Temperature sensors can be
used equally for ° C or ° F measurement/monitoring.
Thermistor Low-Temp
(“Blue”) Sensor
(
TEMP-L-S)
–50° C to 70° C (–58° F to 158° F)
For use in coolers and freezers.
Accuracy: +/-2°F
or setting
Thermistor High-Temp
(“Red”) Sensor
(
TEMP-H-S)
0° C to 150° C (32° F to 299° F)
Accuracy: +/-2°F
or setting
Winland_English.fm Page 44 Wednesday, July 5, 2006 1:33 PM