Winland Electronics EA400 - Manual (Page 43)

D-011-0093 41
An alarm indication for any mode is shown by:
„ Flashing data corresponding to the Zone where the alarm is occurring.
„ An (Alarm) icon will flash during an alarm, and is solid if time delay is activated.
When time delay expires, icon will flash indicating an output relay has been
activated for the Zone in alarm.
To silence the auxiliary for 10 minutes, press the ALARM SILENCE key.
Note: Even if an alarm is silenced, the alarm display for the Zone is still displayed
until the alarm condition is corrected.
Note: If an alarm cannot be promptly corrected, and you wish to avoid repeated
alarms for the Zone, the Zone should be removed from service by setting the
Zone to Disabled ( ). Refer to Programming the Zones.
Viewing Alarm History
The Alarm History function stores up to 8 alarm events. View the alarm history as
follows:
1. Press the ALARM HISTORY key. The display shows the most recent stored alarm
alternately toggling between:
• Time of alarm occurrence, Zone number, and limit exceeded.
• Date of alarm occurrence, Zone number, and limit exceeded.
Winland_English.fm Page 41 Wednesday, July 5, 2006 1:33 PM