Kramer Electronics TP-107AV - Manual (Page 8)

Overview
5
PC
P
C P
C
PC
PC PC
TP-12 0 Pr oj ector
TP-107 V
PC PC
T P-107V
T
P-
10
7V
TP-107V TP-107V TP-107V
T
P-
10
7V
R
C
-1
08
TP-107V
XGA
C AT 5
K-N ET
C-STP+KNET-6
Figure 1: TP-107V / TP-120 Kit
The TP-107V includes a:
LINE IN CAT 5 connector, that connects to the LINE OUT CAT 5
connector on the previous Line Transmitter
LINE OUT CAT 5 connector, that connects to a receiver (for example, the
TP-120) or to the next Line Transmitter in the chain
CONTROL set of dipswitches
In addition, the TP-107V:
Can be controlled via RS-485
Has a resolution of up to UXGA
Can change the polarity of decoding H and V Sync for video
Can be upgraded via RS-232 and is 12VDC fed
The TP-120:
Has an operating range of more than 300ft. (more than 100 meters)
Includes EQ. and level controls
Has the power connect feature
1 and is 12V DC fed
1 Powering via the CAT 5 cable from either the receiver or the transmitter is good for 100 meters. Above it, both sides should
be fed with power