Alcatel-Lucent 7750 SR OS - Manual (Page 411)

Filter Policies
7750 SR OS Router Configuration Guide Page 411
Entry The filter ID filter entry ID. If the filter entry ID indicates the entry is
(Inactive) , then the filter entry is incomplete as no action has been
specified.
Log Id The filter log ID.
Src. IP The source IP address and mask match criterion. 0.0.0.0/0 indicates
no criterion specified for the filter entry.
Dest. IP The destination IP address and mask match criterion. 0.0.0.0/0 indi-
cates no criterion specified for the filter entry.
Protocol The protocol ID for the match criteria. Undefined indicates no proto-
col specified.
ICMP Type The ICMP type match criterion. Undefined indicates no ICMP type
specified.
Fragment Off — Configures a match on all non-fragmented IP packets.
On — Configures a match on all fragmented IP packets.
Sampling Off — Specifies that traffic sampling is disabled.
On — Specifies that traffic matching the associated IP filter entry is
sampled.
IP-Option Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.
TCP-syn Off — Specifies that the SYN bit is disabled.
On — Specifies that the SYN bit is set.
Match action Default — The filter does not have an explicit forward or drop
match action specified. If the filter entry ID indicates the entry is
(Inactive) , then the filter entry is incomplete as no action has been
specified.
Drop — Drop packets matching the filter entry.
Forward — The explicit action to perform is forwarding of the
packet. If the action is Forward, then if configured the nexthop infor-
mation should be displayed, including Nexthop: , Indi-
rect: or Interface: .
Forward - indirect: ip-addr
Forward - interface: ip-int-name
Forward - next-hop: ip-addr
Ing. Matches The number of ingress filter matches/hits for the filter entry.
Src. Port The source TCP or UDP port number or port range.
Label Description (Continued)