Alcatel-Lucent 7750 SR OS - Manual (Page 199)

VRRP
7750 SR OS Router Configuration Guide Page 199
List of Commands
Table 7 lists the commands to configure VRRP policy parameters, indicating the configuration
level at which each command is implemented with a short command description.
Table 8 lists the commands to configure VRRP parameters on an interface and in an IES or
VPRN service, indicating the configuration level at which each command is implemented with
a short command description. Refer to the IES chapter of the 7750 SR OS Services Guide for
information about IES command syntax and usage.
The VRRP command list is organized in the following task-oriented manner:
• Configure a VRRP policy
• Configure VRRP policy priority events
• Configure IES or VPRN VRRP owner parameters
• Configure IES or VPRN VRRP non-owner parameters
Table 7: CLI Commands to Configure a VRRP Policy
Command Description Page
Configure a VRRP policy
config>vrrp>policy
description Text string describing the policy. 243
delta-in-use-limit Sets a lower limit on the virtual router in-use priority that can be derived
from the delta priority control events. 242
Configure VRRP policy priority events
config>vrrp>policy>priority-event
port-down Creates a port down priority control event that monitors the operational
state of a given port or SONET/SDH channel. 248
hold-set Configures the amount of time before the set state for a VRRP priority
control event can transition to the cleared state to dampen flapping
events. 245
priority Configures the effect the set event has on the virtual router instance in-
use priority. 246
lag-port-down Creates context for configuring Link Aggregation Group (LAG) priority
control event that monitors the operational state of the links in the LAG. 250