Alcatel-Lucent 7750 SR OS - Manual (Page 114)

Configuration Commands
Page 114 7750 SR OS Router Configuration Guide
seconds — Determines the time frame, in seconds, that is used to limit the number of redirects issued
per time frame.
Values 1 — 60
time-exceeded
Syntax time-exceeded [number seconds]
no time-exceeded
Context config>router>if>ipv6>icmp6
Description This command configures rate for ICMPv6 time-exceeded messages.
Parameters number — Limits the number of time-exceeded messages issued per the time frame specifed in
seconds parameter.
Values 10 — 1000
seconds — Determines the time frame, in seconds, that is used to limit the number of time-exceeded
messages issued per time frame.
Values 1 — 60
unreachables
Syntax unreachables [number seconds]
no unreachables
Context config>router>if>ipv6>icmp6
Description This command configures the rate for ICMPv6 unreachable messages. When enabled, ICMPv6 host
and network unreachable messages are generated by this interface.
The no form of the command disables the generation of ICMPv6 host and network unreachable
messages by this interface.
Default 100 10 (when IPv6 is enabled on the interface)
Parameters number — Determines the number destination unreachable ICMPv6 messages to issue in the time
frame specified in seconds parameter.
Values 10 — 1000
seconds — Sets the time frame, in seconds, to limit the number of destination unreachable ICMPv6
messages issued per time frame.
Values 1 — 60
local-proxy-nd