Alcatel-Lucent 7750 SR OS - Manual (Page 132)

Show Commands
Page 132 7750 SR OS Router Configuration Guide
Sample Output
A:ALA-A# show router ecmp
===============================================================================
Router ECMP
===============================================================================
Instance Router Name ECMP Configured-ECMP-Routes
-------------------------------------------------------------------------------
1 Base True 8
===============================================================================
A:ALA-A#
fib
Syntax fib slot-number [family] [ip-prefix/prefix-length] [longer] [secondary]
Context show>router
Description Displays the active FIB entries for a specific IOM.
Parameters slot-number — Displays routes only matching the specified chassis slot number.
Default all IOMs
Values 1 - 10
family — Displays the router IP interface table to display.
Values ipv4 — Displays only those peers that have the IPv4 family enabled.
ipv6 — Displays the peers that are IPv6-capable.
ip-prefix/prefix-length — Displays FIB entries only matching the specified ip-prefix and length.
Values ipv4-prefix: a.b.c.d (host bits must be 0)
ipv4-prefix-length:[ 0 — 32
ipv6-prefix: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
ipv6-prefix-length: 0 — 128
longer — Displays FIB entries matching the ip-prefix/mask and routes with longer masks.
secondary — Displays secondary VRF ID information.
icmp6
Syntax icmp6
Context show>router
Description This command displays Internet Control Message Protocol Version 6 (ICMPv6) statistics. ICMP
generates error messages (for example, ICMP destination unreachable messages) to report errors during
processing and other diagnostic functions. ICMPv6 packets can be used in the neighbor discovery
protocol and path MTU discovery.